Lian Li O11Vision Compact White-Steel-Tempered Glass ATX Mid Tower Computer Case-Back Connect Support-O11VPW

Aesthetically pleasing.
This case is it. This is the endgame case I have been looking for. Lian Li made this extremely easy to assemble as you can pretty much, take any piece out of the case so that you may install your fans, AIO, and motherboard. The ssd holder is nice and out of the way when installed. The wire managment area is spacious and there are included velcro straps to ease the pain of tying everything together.The glass panels is what did it for me. I have the all white case and the glass panels really give that extra oompf when looking at your masterpiece. If you have the Lian Li fans with the case, there are almost no wires visible after completion. From face on, you can only see 2-3 cables not including my MOBO cable is that is a Lian Li strimer. Lian Li says you cannot vertically mount your gpu but if you get the Cooler Master vert mount or similar brand, you can vertically mount your gpu. I will say the mount is very close to your fans, so if you use anything bigger than a 25mm fan, you cannot do it.Cons – The case didn’t come with the included silicone blanks and Lian Li takes forever to respond. I did try purchasing through Ali Express but the website is either broken and/or they are sold out.The other con, which is not a con per se, I do wish they had cutout for those who might upgrade to the behind the MOBO connectors as a sort of future proof. I am sure it will be a long way before that even becomes a standard so it is not really relevant. I just wanted to add that for those thinking about that route.I would highly recommend this case for anyone looking for something that really stands out and holds good thermal temps. Roughly, my CPU hovers around 32° C idle and my gpu is at 36° C with no load. House is currently at 71° F.

Best Case Ever
Super easy to build in as every panel comes apart. Plenty for space in the back panel for cable storage. If you’re one who just crams all the cables in the back panel this case is perfect. I opted for the two exhaust fan configuration and my temps are perfect under stress. Definitely one of the best-looking cases on the market.

Wonderful!
It’s very spacious (very big case) with lots of room for parts. It’s built well, and gives you plenty of different options for placements and organization. The airflow is great but it is very heavy. I couldn’t lift it myself. (but I am also 110lbs so take that with a grain of salt…) Great case, buy it if you’re considering it.

My Absolute Favorite Case to Build With
I’ve built over 500 systems in 4 years, and I’ve been doing it more than 20 years. In that time, I’ve ran into a few cases that I really LOVED to build with, and this is one of them.There are some bigger ones with more space, but they also weigh as much as a Mazda Miata. The 011 Dynamic, for most gamers, is just perfect. Great airflow, great cable management, and great looks. The entire 011 line is just stellar.

My second Lian Li case. It looks wild right out of the box. Mine was perfectly protected. Feels as solid as it could, being 3-sided tempered glass. I don’t overclock, and my temps are perfect, even under max load. Using a 360mm AIO pulling air in from the side, 2-140mm intake from bottom, and 1-120mm exhaust on back (this wasn’t necessary at all, I only put it there for the look) and my 14700k does not crack 92. Recommend reusable latex gloves or whatever anytime handling the glass, less effort than cleaning smudges.

الكيس فخم جدا من شركة ليان لي وخصوصًا لمحبين تركيب الإضاءات داخل الكيس لإنها يظهرها بشكل رائع لوجود ثلاث واجهات زجاجية -الكيبل مانجمنت وتنظيم المداخل والمخارج ممتاز ويسهل عملية التركيب وإخفاء الكيابل الغير مرغوبة -المشكلة الوحيدة أن الكيس يجي بدون أي مراوح وتحتاج تشتري من عندك أو تركب مراوحك القديمة لو كانت متوفرة ، عموماً أنصح فيه بشدة –