SAMA ATX PC Case,Tempered Glass Mid Tower Case,Genuine Walnut Wood Front,4 x 120mm ARGB PWM Pre-Installed,Type C USB,PC Gaming Case,Black(V-Nature)
$94.99
Price: $94.99
(as of Jan 03, 2025 00:08:44 UTC – Details)
【ATX PC Case Wood Appearance Design】SAMA V Nature ATX PC Case Each Space Is Skillfully Laid Out, Due To Strong Compatibility. The Mid Tower Is Installed Without Any Obstacles,Support ATX/Micro-ATX/ITX.
【High Speed IO Pane】The Computer Case Has Rich External Interfaces.It Is Equipped With 2 USB 3.0 and TYPE-C Ports High-Speed Interfaces To Facilitate Connection With Various New Standard Devices, Audio Jacks, LED Control, And Power/Reset Buttons, Ensuring Easy Accessibility And Convenience.
【Tempered Glass Side Panel】Tempered Glass Side Panel Can Enjoy The Simple And Clean Appearance Without Losing The Gorgeous RGB Effect Which Inside Your PC Case.PC Assemblers Can Carry Out Various DIY According To Favorites, Enjoy Charm Of Gaming PC Case While Featuring 2 Magnetic Dust Filters On The Top And Bottom To Reduce The Dust.
【High-Performance Airflow for Good Dissipation】Perforated Rear and Top Panels Direct Filtered Air Through Out The Computer Chassis To Cool Down Components. The Mid Tower PC Case Pre-Installed 4 120mm PWM ARGB Cooling Fans.Provides Extreme Cooling For The ATX PC Case.
【New Trend BTF Back Plug Motherborad Design】The PC Case Compatible With Most Mainstream Hardware In The Market,Support VGA Card Up To 410mm,Support CPU Cooling Height Up To 181mm,Support Top Mounting Up To 360mm Liquid Rad.
8 reviews for SAMA ATX PC Case,Tempered Glass Mid Tower Case,Genuine Walnut Wood Front,4 x 120mm ARGB PWM Pre-Installed,Type C USB,PC Gaming Case,Black(V-Nature)
Add a review
Related Products
$94.99
Marcello –
A great case.
I put this case through its paces, building an AI rig with dual 3090s and a 13600k. On the whole it performed exceptionally well. There’s ample room for GPUs, coolers and AIOs. It’s clearly derivative of the Fractal North which is a case I own and enjoy. It also supports motherboards with back connectors which is a welcome touch.There are a few weak points which I shall address.- the included fans are quite loud. They clearly cut a corner or two there.- the CPU 8 pin power cable can’t really fit if you install the motherboard first. I had to remove the board and pass it through the hole. Just an extra mm or two on the top would really go a long way there.Other than that I found this to be a great case, looks great, easy to build in, and has good airflow. Overall highly recommend.
Gazooda –
Beautiful modern computer case with all the bells
This is an elegant computer case that showcases a minimalistic aesthetic including real wood on the front, a popular sort of design in recent years. I was highly impressed by how well it fits and matches my rustic brown computer desk. The sides are screwless and very easily remove to expose the full internals. One side is for cable management and includes all the necessities to connect the front case ports to a motherboard. The other side allows easy and plentiful access to install your components. The PSU has a dedicated cage for it and the dimensions of this case should be enough to accommodate the majority of high tier computer components on the market today including the 40-series NVIDIA graphics cards. The top has a nice magnetic screen, making it easy to clean dust away (and similar on bottom). Looking forward to building a modern PC from this case and am impressed by how far computer cases have evolved from the original plain white boxes.
JumpyWizard –
Elegant and Functional
Good case. Not the greatest, but unique-looking enough to warrant it a good review. Good amount of space inside for your build, nothing special though. It is basically like every other case out there, but with a cool aesthetic.
Melissa –
Beautiful Case, HARD TO OPEN
While looking through amazon, I came across this and it was so beautiful I just immediately bought it without taking a look at the reviews. When it arrived, I was excited to build in it. However, the manual was for some reason inside the case and I couldn’t figure out how to open it. I opened the back pane rather easily but the front pane I could not. I built in many cases before, so I have seen my fair share of design, and let me say how poor the design is to have a pop-off glass panel that is IMPOSSIBLE to grip with that tiny groove. I had several friends try to pop open the glass panel but at the end I gave up. Lots of reviews say to use a screwdriver but I don’t want to risk damaging it so I never tried it. It’s a shame, was really excited to build in this. I am going to return it now.TLDR: Beautiful but poor access design
Ben –
Elegant and beautiful
I absolutely love how sleek and classic this case looks next to my plants! The wood panels on top showcase a natural aesthetic that pairs beautifully with the overall clean, white design. It all comes together so seamlessly.Building with this case was a breezeâevery part fit perfectly, and the glass panel is genuine tempered glass, adding both durability and style. Highly recommend!The LEDs on the fans are bright and can be programmed with the motherboard!
DaHogs –
Awesome case!
I ordered this case to start a new system build. The case is very solid build and it has exceeded my expectations. The front grill is really cool with real wood and gives a sophisticated look to it. The side panels and front all pop off without any tools required and they snap back into place without any play in them. The top has a magnetic screen and the bottom also has a screen that slips into grooves for easy cleaning. A very well designed case with good cable management and plenty of room for your drives on the side. I have a Fractal Meshify and this case I would say has improved upon that design with greater air flow. It is also a plus that this comes with 3 forward mounted 120mm fans and 1 rear also which are all RGB. Highly recommend and give it a Thumbs up!
Drew –
easy build case
Nice case! Very spacious and well organized making it easy to build in. I like how the side panels come off and they feel firm and secure when snapped back in place. The front panel is a bit more difficult to work with, but it works.It was easy to route cables behind the mobo / back side of the case for a very clean look through the glass panel. Pre-installed fans are actually decent so far and most of their cable routing is done already.
Teigan Evans –
Sleek Design
There’s a lot of good things to say about this case but it also has some drawbacks like any case. First and foremost, it’s a nice looking case that feels at home in a professional environment. It doesn’t radiate “gamer” which is nice if you want a PC that blends into your space. I also, like that the inside is solid white too which makes it great if you want to do a white out custom build. There are a lot of spaces for running wires to your mobo too. The fans inside aren’t great but they’re pretty good still.I had a really hard time fitting an older ATX motherboard. It ended up covering up some of the pass through slots at the bottom and made it hard to run wires to the bottom of the board where some of the connectors are. My new z790 fit really well though. The above the PSU are a nice touch for feeding air to the GPU but there isn’t a lot of space between the PSU and the chassis the fans sit on so it’s a little choked off.Maybe my biggest gripe about the case is that the panels come off but they always feel like they’re going to break when I you pop the panel off.