Zalman i4 TG ATX Mid Tower Desktop Computer Gaming PC Case, 4 x 140mm RGB Fans Pre-Installed, Tempered Glass Side Panel, 360mm Radiator Support, Black

Extreme Value for budget PC
I cannot believe the value of this case as well as the versatility! I purchased the white model with glass side-panel and it looks amazing! The case comes with 4 140 mm (static) RGB fans (with a case switch to turn off the RGB lighting if not wanted). While the fans just connect to SATA power and they are a lower speed, they move plenty of air for my modest (budget) PC.AMAZING – This ($60) case supports dual-slot vertical GPU mounting! I actually couldn’t find a less-expensive case (with fans) in all of Amazon!The case features (2) USB 3.0 and (1) USB 2.0, Power, Reset, RGB on/off switch, headphone and mic jacks on the top of the case, supports a total of (6) 140 mm or 120 mm fans, mounts for (2) 2.5 drives and (2) 3.5 drives, a mounting bracket for vertical GPU mounting and a GPU support bracket for supporting the larger GPUs. There is space for a radiator up front and a smaller one up top as well (and the top has a magnetic dust filter as well).The ONE thing I wish it had was support for USB-C, however, this isn’t important (at all) seeing that the better motherboards will include USB-C through the rear i/o (or you can add a PCIE card with one or more ports). I think one or more reviews mentioned that the case is ‘light weight’, but to be honest, I like it that way. It’s definitely sturdy enough for my needs and doesn’t feel cheap or flimsy.I will eventually include some pictures of my ‘budget’ system (with a few upgrades) but ultimately, I was able to create a functioning PC (this case, 600 watt power supply, AMD Ryzen 5600G CPU, MSI WI-FI motherboard, 16 GB RAM, and 1 TB M.2 SSD) for $435 (before tax)! **In reality, when I ordered the motherboard, it appeared to be ‘on sale’ but in reality, it was an ‘open box’ motherboard from Amazon Warehouse which dropped the price by $35 which allowed me to add a (white) AMD Radeon RX 580 GPU for a grand total of $500 (before tax).

This tower is great, nice rgb, good air flow
Came with a support stand for my GPU. Love the design, and ease of access to inner components with the glass “door” and has a nice sleek handle to open it. Fans work great imo. Haven’t had a single problem with this tower whatsoever! Love it.

YGWYPF (You Get What You Pay For) But Worth It
When I received my package, both the outer Amazon package, and the inner Zalman box were opened. At least the outer box was already opened prior to UPS delivering it.Despite the claim of C. Church (Vine Voice, which I cannot join as an Amazon Employee despite having received an invitation), there is NO fan controller. It is not mentioned on this site or in the case’s documentation.This is a budget mesh case and you can tell, although they did a very good job of making sure there are no sharp edges. For anyone who wants to save money and doesn’t need a LARGE case, this is a good option, unless you absolutely MUST have a USB-C 3.2 on the front I/O. You could modify it by replacing the 2.0 with 3.2C, although it’s a tight squeeze.PROS:Exterior: Black The left side and front are mesh, with a magnetic mesh filter. There is also a large mesh section on top that has a magnetic mesh filter on the outside. The PSU air intake has slide-in piece of mesh filter. The front mesh panel is made of metal mesh over a plastic piece on each end. 7 card slots + 2 vertical card slots Slot covers are attached with thumb screws (i.e. reusable) and it comes with an extra cover Aside from the front, everything is metal. 4 5/8″ plastic feet with rubber bottoms No LEDsGraphics Card (GC) support: Adjustable GC anti-sag support Vertical GC mount brace Max. GC length 320mmStorage: If you remove both GC supports, you can mount 2 3.5″ storage devices (hardware not included) 2 2.5″ SATA drives can be mounted on the back of the mobo plate with included frames and thumb screws There is a double 3.5″ drive bay in the PSU area that can be slide forward and back by loosening 4 thumb screws on the bottom of the case. This makes it much easier to adjust than other cases where the screws are inside, and only offer 2-3 positions. The removable plates for the drives are of plastic.Includes 6 120mm fans. The 3 front fans are mounted on a very large-bore honeycomb panel that isn’t removable unless you drill out the rivets. The front can accept 3 120mm fans or 2 140mm fans or possibly 2 140s and a 120. There are two top fans are mounted on a permanent large honeycomb panel. The top can accept up to 3 120mm or 2 140mm fans. The rear can accept 1 120mm or 1 140mm fan. The fans are daisy-chained together using 3-pin standard DC connectors, so you’ll only need one fan header on your mobo.PSU area: The PSU shroud has large honeycomb holes ventilating the PSU area. There is an opening on the side of the shroud so that the PSU is visible from the left side. Useful if you have a PSU with LEDs there.Misc:The top I/O panel has microphone & speakers jacks, 2 USB 3.0A jacks, 1 USB 2.0A jack, power, reset and an LED button, the cable of which goes to the motherboard LED jumpers.Standard cables for connection to the mobo are included.The motherboard area has a large opening for easy access to the rear mounting hardware of the CPU.The accessories bag includes bolts, zip ties, a system speaker on a cable, and standoffs.CONS:Fans: The fans are low quality, max 1,000 RPM, don’t move a lot of air or provide much pressure at all. You’ll probably need to replace them if you have problems with overheating. The fans will not be able to handle the barrier of the filters properly. Even the rear fan struggles to move much air at 42.8 CFM through the holes of the cover.The front filter does NOT cover the entirety of the front mesh; the 45-degree corners and sides are unprotected.The mesh is made with smaller holes that don’t necessarily line up with the holes in the panels.The 3.5″ drive plates for the PSU bays are plastic, warped and don’t fit well.No cable management system.No LEDs

Insane quality for price
– Incredible airflow- SIX pre installed fans, fits 360mm rad- Magnetic dust filters- Vertical GPU support and anti sag brace- Beautiful fit and finish.- Tons of space to cable manageFeel like I got away with robbery for this price. Wanted something with no glass or RGB and this is perfect. Whoever assembles these actually gives a crap too.Minor flaw with bottom of the front panel mesh not lining up with side panel mesh.

You get a lot for your money with this case, it will accept a standard ATX board and the layout is well tought out. I managed to fit a 280mm Aio for the CPU, a 240mm rad with pump/reservoir combo to cool a 2080ti card fitted with a waterblock in vertical position. The size of it is pretty small, since my goal was to build an affordable living room PC with leftover parts from my upgraded main build. I’m very pleased with the results. I recommend it.

Awesome case for the price its a steal 6fans and more accessories in a bag for 100$ cant beat it its amazing