GAMDIAS AURA GLV2 240mm AIO CPU Liquid Coooler, Hidden Cable Design, Fully Rotatable Pump, High Performance PWM Fan, ARGB MB Sync & 30 Built-in Light Effects, Intel LGA 1700/1200, AMD AM5/AM4, White

Superior Cooling
I got this cooling system for my new build, and I am super pleased with it! It is a little scary removing the original CPU mounting hardware off the motherboard, but follow the instructions and you will be fine.Word of warning though, be sure not to use too much colling paste of it might drip when installing the cooling block to the CPU. Probably best to install it laying the computer on the side.After installing the monitoring app you can see the CPU temperature in Realtime straight off the CPU cooling block! I love that feature! You can even twist the top of the cooling block display to orient the display however works the best for you.

Serious room for improvement but definitely keeps processor cool!
Installation: Intermediate Skill, (Mainly due to lack of info and instruction even online).Pros:- As stated it does provide a very stable cooling. I run a Ryzen 5800x3d and tested with Cinebench. Highest temp. was 85C (2 hour / all core test) & lowest was around 34C (Ambient was 75F).- Solid mounting solution. (Connecting the pump/cooling block to the processor.)- Very cool lighting without ARGB (30 built in). Has some pretty unique selectable options besides the standard rainbow, solid, etc.- Can be connected to your reset button on your case.- 3 wires run from the pump & one from the fans, Reducing the amount of wiring to deal with.- Can be connected to their AEOLUS ARGB/fan controller BUT requires a proprietary cable that isn’t included with AIO, the fan/controller kit, or sold on the site.Cons:- Doesn’t tell you that you need to hold down the reset button to put it in ARGB mode.- No option to refill coolant unless you remove copper cold plate and pray you have access to the fluid.- Does not connect to their AEOLUS ARGB/fan controller w/o their proprietary cable that isn’t included with AIO, the fan/controller kit, or sold on the site.- Limited instructions, mainly drawings with virtually no descriptions. You can easily get lost if you are new to AIO installs.- Company doesn’t sell matching fans for this AIO.Total Score: *** Stars===============================Key:***** Stars = Excellent Product!**** Stars = Great but has some minor flaws.*** Stars = Works as promised, has some flaws, seems okay.** Stars = Functional junk with many flaws.* Star = Hot, smelly Garbage!

Loud
Has a loud whining noise from the pump can’tbe in the same room as the computer you’ll get a headache

Seems to work great!
No issues so far, keeps my Ryzen 5600X below 60 degrees while running Rust at 1440P on max settings. As others have stated there are absolutely no instructions, this was the first water cooler I have ever installed and it was pretty straightforward without instructions… but I’m sure some people would appreciate them. Figuring out which CPU mount is the correct one is probably the most difficult part, but that’s just trial and error until you get it.

installé sur intel i7, 12700KF 3.60 GHz, assurez vous d’avoir l’espace necessaire,

7800x3d not the hottest chip but this cooler does ok, fans around 70% which is around 1500rpm, pump full speed.Ran three consecutive runs of Cinebench R23 and the 7800x3d peaked at 83c in a warm room of 27c.Fans are quiet around 1000-1100 rpm then can be heard after that, lowest speed around 800 are virtually silent.Fans come already attached to the radiator and the cables hidden inside somehow so you only have one the 4 pin PWM and ARGB cable to deal with, pump ARGB cable attaches to the fan Argb cable.Pump is silent, top speed is around 2600rpm, one quirky thing I found is if you turn the pump speed down too much the argb lights will go off on the pump and fans.A small cable coming off the pump you can attach to your case reset switch and there is a small switch on the cable to change the argb manually.The one thing i don’t like is you have 4 cables altogether coming off the pump which can look untidy.No gurgling water noises, on AMD its the 4 pole attach method which is the best in my book, cant stand the clip over method, if this cooler was the clip over way I would have never have bought it.The Silver Aura logo rotates, so you can have the tubes anyway you want.You get a lot of different mounting hardware and a small tube of thermal paste.For the price it cools well and looks good, has a lot of competition especially from Thermalright around this price point.Only a two year warranty.