VETROO AL800 Full Tower PC Computer Case w/Door Opening Design Tempered Glass, E-ATX/ATX Support, Built-in ARGB LED Strip, Pre-Installed ARGB & PWM FDB Fan in Rear, Support for 40 Series GPUs -Green

Great Tower, Friend Loved The Color
Building a friend their PC and this is the case they wanted. They love the color on it and that the glass door is nice and easy to open. Makes dusting inside the case a breeze.My only complaints are that the RBG light hub that’s wired up in the back, the sticky pad that is used to hold onto the case wasn’t that strong in my opinion. But it’s an incredibly minor issue; I slapped on a new sticky pad and it was fine.Another thing is that the drive case in the bottom of the tower (for the HDD/SSDs to sit in), was a slight pain to remove; they didn’t need it and I wanted to remove it for more cable management storage for the PSU. The paint/coating that’s used on the case really held it in place – it held a couple of the screws around the case a little tightly as well. But taking it out didn’t damage the coating or anything on it, was just a little more difficult that it probably should have been.But overall all the wiring worked, the case is well made, the fans all worked and they loved the color; no major complaints.

Needed some extra parts for full functionality, but great value
Super cute case that’s a great size- not too big or too small. The feet have foam pads to protect your desk. My glass side panel has a small interior scratch, but I can’t say for sure that it wasn’t my fault. The instructions don’t mention that the installed fan is designed to work with the fan hub included with the 3-pack from the same seller, so if it’s not making sense, I suggest purchasing those. The fans are quiet. The instructions are very bare-bones in general, so maybe not great for a first timer by themself, but fine enough. My motherboard also did not come with anywhere to hook up the USB-C on the top of the case, but a PCIE extension card solves that issue without too much hassle or cost. I’m overall satisfied with the end result.

Probably best looking case out there – PSA don’t use fan built-in controller
For my money this is the best looking and most functional case on the market. The black border around the glass window really showcases your custom build in a stunning way. The door pivots open easily via a simple magnetic mechanism, no screws required. My GeForce 3080 TI and all other components fit easily as I’d expect.The one caveat is the built-in fan controller on the back side panel of the case that powers all 6 built-in fans. The problem is that there is no way to control these fans from the motherboard, so they’re stuck blasting away at 100% all the time. For all the other reviews that mention how effective the fans are, or how loud this case is, that’s why. It’s a bit of work but do yourself a favor and unplug them all from the fan controller and instead plug them into the motherboard so you can control them based on CPU/GPU temps and have a much quieter PC as a result.

Good for beginners with a MATX mobo!
Cable management was easy to figure out and all of my components fit just right. I’ve already decorated my case with some stickers 🙂

The argb fan controller works fine but I connect both the fan and argb connectors directly to mobo headers. The two installed lower fans are redundant in my opinion, and I removed these. In fact i would suggest removing them in the first instance to install a full ATX, for full to the mobo headers/ connectors. Although there is USB/C connectors for the case ports, they will not be up to the full speeds required for most users but work as expected. There are all of the screws required for build, provided in a bag, in the case. The case is made of a relatively thin alloy and when screwing in fans, etc. be careful not to overtighten as this could deform the screw holes. The layout is decent and ATX mobo and power supply went in easily enough. There is no PWM direct management for any of the supplied fans, although white 120mm fan replacements do not look out of place. The general space to accommodate various cooling options such as top mounted 360 aio coolers is more than adequate although a decent fan cooler will fit perfectly as well. The airflow through the unit appears fine on temperature testing although I did replace all of the fans for the aforementioned reasons. Power supply is good although easier to remove the disk tray that has a thumbscrew fitting, for easier cable management (replace after cabling if required).Overall, when finished, looks very nice and not out of place for a decent build.

Thin metal. Nice glass. Pink is in.Instructions were thin with zero on the mess of wires and English errors. We bought it because it’s pink period.Bitter disappointment after half a day of assembly.